Description
Metal panel switch with red LED backlight and warning triangle symbol is designed for panel mounting and control of an electrical circuit. Latching design allows maintaining the selected position of the switch. The product is suitable for applications where visual identification of the control element and increased resistance of the front part against dust and water are required.
Technical specifications
Product type: panel metal switch
Backlight: red LED
Maximum voltage for LED backlight: 12 V
Maximum switching voltage: 250 V
Maximum switching current: 5 A
Contact type: NO, NC
Mounting diameter: 19 mm
Switch diameter: 22 mm
Protection: IP65
Design: silver metal body
Symbol on the button: warning triangle
Switch function: switching and latching
Functions and features
The latching mechanism holds the switch in the selected position after pressing.
Red LED backlight serves for visual signaling of the state or position of the control element.
NO and NC contacts allow use in both normally open and normally closed circuits.
Metal design is suitable for solid panel mounting.
IP65 protection ensures protection against dust and water in the range corresponding to this degree of protection.
The warning triangle symbol allows use for controlling or signaling warning functions.
Ideal for
Mounting into control panels.
Controlling electrical circuits with a requirement for a latching function.
Applications with the need for red light identification of the control element.
Connections where an NO or NC contact is used.
Control elements for warning or signaling functions.
Package contents
1 pc metal switch with red backlight and warning triangle symbol.
Why choose this product
Contains a latching switching mechanism for permanent closing or opening of the circuit depending on the connection.
Supports NO and NC contact configuration.
Features red LED backlight for signaling use.
Has IP65 protection and metal panel design.
Mounting diameter of 19 mm allows installation into a corresponding hole in the panel.
Installation and operation instructions
Before mounting, verify the compliance of the NO and NC contact connection with the required circuit function.
Connect the LED backlight only in accordance with the specified maximum voltage for the backlight.
The switched circuit must not exceed the specified maximum voltage and current values.
Install the switch into a panel with a corresponding mounting hole.
When connecting, observe the polarity of the backlight if specific terminals require it.
Safety warnings
Mounting and connection may only be performed by a person with appropriate electrical qualification.
Always disconnect the power supply of the switched circuit before installation.
When used in circuits with dangerous voltage, there is a risk of electric shock.
Incorrect connection of contacts or backlight can cause a short circuit, overheating, or damage to the switch.
Do not exceed the maximum switching voltage, maximum switching current, or maximum voltage for the LED backlight.
Reviews
There are no reviews yet.