Description

Panel DC power socket for supplying DC voltage to devices. The 3.5×1.35 mm variant is suitable for compact power adapters and applications with lower current consumption, where panel mounting and wire connection using solder terminals is required.

Technical specifications

Connector type: DC power socket (female), panel mount

Connector size: 3.5 × 1.35 mm

Model number: DC-220B

Rated voltage: 30 V DC

Rated current: 0.5 A

Mounting thread: M8.0 × 0.75

Dielectric strength: AC 50 V (50 Hz), 1 minute

Contact resistance: 0.03

Insulation resistance: 100 M

Lifespan: 5000 cycles

Operating temperature: -30°C to +70°C

Functions and features

Panel mounting with thread and nut for mechanically stable mounting

Solder terminals for connecting wires or cabling inside the device

Compact design suitable for smaller devices and power inputs

Ideal for

Power inputs for small electronic devices

DIY electronics, prototypes and service repairs

Panel grommets for DC power supply in low voltage switchboards and cabinets

Package contents

1× panel DC socket 3.5 × 1.35 mm + fixing nut

Why choose this product?

Standardized size 3.5 × 1.35 mm for compatibility with corresponding DC plugs

Panel mount with M8.0 × 0.75 thread for fixed mounting

Installation and operating instructions

Before installation, verify the size of the mating piece (DC plug) 3.5 × 1.35 mm and mechanical compatibility with the panel.

When soldering the terminals, choose the procedure and temperature so as not to damage the connector insulator.

After installation, check the tightening of the nut and the strain relief of the wiring.

Safety notice

The product is designed for DC power supply within the limits of the rated voltage and current; exceeding the parameters may lead to overheating or failure.

Perform the installation with the power supply disconnected and after connection, verify the polarity and correct function of the entire assembly.