Description

The Type E temperature probe is designed to measure temperatures from 0 to 400 °C when used with a compatible temperature controller or measuring instrument. Constructed with a stainless steel probe, external metal braiding and two fork terminals, it is suitable for fixed connections in industrial and technical applications. The product is available in 1 m and 2 m cable length variants.

Technical specifications

Thermocouple type: E

Measuring range: 0 to 400 °C

Probe material: stainless steel

Inner insulation: glass fiber

Outer shielding: metal braiding

Connection: 2 fork terminals

Fork terminal pitch: 3.5 mm

Sensor tip diameter: 6 mm

Thread: M6 × 1

Functions and features

The probe is intended for temperature sensing using an E-type thermocouple.

Stainless steel construction of the sensing part supports use in technical and industrial conditions.

Glass insulation and metal braiding protect the lead during operation in environments with elevated thermal stress.

The pair of fork terminals enables connection to corresponding terminals of a controller or measuring device.

1 m and 2 m length variants allow selection according to installation distance.

Ideal for

Connection to temperature controllers

Industrial temperature measurement

Temperature measurement on machines, equipment and process units

Replacement probe for compatible measuring and control applications

Package contents

1x Type E temperature probe

Why choose this product

Clearly specified E-type thermocouple and 0 to 400 °C range

Construction with stainless probe, glass insulation and metal braiding

Secure connection via two fork terminals

Choice of two cable lengths for different installation conditions

Installation and operation instructions

Before connection, verify probe compatibility with the measuring or control device for E-type thermocouples.

During installation observe correct polarity and ensure mechanically secure connection of both conductors.

Install the sensing part so it is exposed to the measured medium within the range intended for this probe.

Do not route the cable through areas with risk of mechanical damage or excessive bending.

Safety warnings

Perform installation only with the equipment disconnected from power.

Use the product only with a compatible measuring or control device.

Incorrect wiring may lead to erroneous measurements or damage to connected equipment.

When used at high temperatures there is a risk of burns from the probe surface and adjacent parts.

If the probe is part of industrial equipment, installation should be carried out by a person knowledgeable about the relevant wiring and operating conditions.