Description
The holding solenoid is designed for electrical holding of ferromagnetic parts in industrial, automation and security applications. The design corresponds to the use as a holding solenoid for firm attraction and holding of a metal counterpart when powered. The product is suitable where compact electromagnetic holding is required with the possibility of continuous operation with the appropriate power supply and operating mode.
Technical specifications
Product type: holding solenoid
Body dimensions: 120 x 50 x 40 mm
Nominal holding force: 2000 N
Mounting holes: 2x M8, 70 mm spacing
Outlet length: 500 mm
Weight: 1400g
Insulation class: B, 130 °C
Hi-pot test: AC 1000 V, 50/60 Hz, 2 s
Duty cycle: 100% or 50%
At 100% duty cycle: power consumption 25 W, holding force 1500 N
At 50% duty cycle: power consumption 50 W, holding force 2000 N
Versions: 12 V DC / 5.8 , 24 V DC / 23
Voltage at 50% duty cycle: 17 V DC for 12 V variant, 34 V DC for 24 V variant
Functions and features
The electromagnet is designed to attract and hold a metal counterpart while powered.
The block design with a flat holding surface is suitable for fixed mounting.
The power supply is provided via a pair of wires.
The design supports continuous operation at 100% duty cycle.
Higher holding force is achievable with a limited duty cycle of 50%.
For proper function, a clean, flat and magnetically conductive mating surface is required.
The counter piece should have a larger contact area than the holding surface of the electromagnet.
To achieve proper function, the material to be held should be over 10 mm thick.
Ideal for
industrial fixtures and clamping systems
automation equipment
electromagnetic locks and blockages
positioning and fixation mechanisms
mechanical and manufacturing applications requiring electrically controlled holding of a metal part
Package contents
1x holding electromagnet with lead wires
Why choose this product?
Specifically defined mechanical dimensions are available for assembly design.
The product is available in 12 V DC and 24 V DC versions.
The manufacturer provides parameters for both continuous and limited duty cycles.
The assembly is done using a pair of M8 threaded holes.
The insulation class and dielectric test are specified by the manufacturer.
Installation and operating instructions
Install on a solid surface with the retaining surface positioned precisely.
The mating surface of the counterpiece must be flat, clean and free of impurities that reduce the holding force.
When designing the power supply, take into account the coil variant and the corresponding duty cycle.
When operating at higher power, observe the duty cycle limitations.
Professional installation is particularly suitable for integration into electrical and security systems.
Safety notice
Incorrect supply voltage or incorrect wiring can lead to overheating, coil damage or short circuit.
The power supply must be disconnected during installation and service.
The solenoid heats up during operation; ensure adequate operating conditions and do not exceed the specified duty cycle.
In the event of a power failure, the holding force will be lost, which must be taken into account in the design of the device.
The product creates a strong attraction of metal objects; during assembly and operation, it is necessary to prevent pinching of fingers and uncontrolled attraction of ferromagnetic parts.
Reviews
There are no reviews yet.