Description
The LED bulb with BA15S base is intended as a replacement for a single filament bulb in 6 V DC electrical systems. It is suitable for use in vintage vehicles, especially for marker or position lights. A negative ground is required for proper operation.
Technical specifications
Base: BA15S
Power supply: 6V DC
Light color: white
Number of LEDs: 30
LED type: SMD
Beam angle: 360°
Luminous intensity: 450500 lm
Current: 0.4A
Protection: IP22
Lifespan: 50,000 hours
Designed for single filament light sources
Vehicle connection requirement: negative ground
Functions and features
Replacement for classic bulb with BA15S base in 6 V DC systems.
Light emitted over a wide area thanks to the arrangement of LEDs around the perimeter and on the front side.
The filament-free LED design increases resistance to shock and frequent switching.
Lower current consumption compared to classic bulbs of the same base.
Suitable for vehicles where classic bulbs frequently crack.
Ideal for
Historic vehicles with 6 V DC on-board voltage
Side lights
Position lights
Passenger cars, vans and motorcycles with 6 V DC system and negative ground
Package contents
1 pc LED bulb BA15S 6 V DC white
Why choose this product?
It corresponds to the BA15S socket and the voltage is 6 V DC.
It is designed for single-strand applications in vehicles.
It offers a wide 360° lighting angle.
It is suitable for installations where white light and low current consumption are required.
It respects the specific requirements of older vehicles with a minus frame.
Installation and operating instructions
Before installation, verify the conformity of the BA15S socket and the 6 V DC supply voltage.
Designed for vehicles with a negative ground. If the polarity is different, the bulb will not work properly.
Before replacing, turn off the power and let the original light source cool down.
After installation, check the correct function in the luminaire and the mechanical fit in the base.
Safety notice
Incorrect polarity connection or use in a different voltage system may result in damage to the bulb or the vehicle’s electrical system.
Use the product only in a 6 V DC electrical system.
Do not install in a damaged or corroded socket.
Avoid shorting the contacts during assembly.
Reviews
There are no reviews yet.